ethan help needed please

beggsy

Journeyman Pro
Joined
Aug 14, 2009
Messages
1,546
Location
leeds
Visit site
i am after a bit of advice on a shaft choice for a fairway wood or a hybrid i have currently been fitted for my irons with a px 6.5 rifle shaft and was wondering what would be a similar shaft for one of the above cheers in advance
 
Yo Ethan while you're at it which stock shaft of the 910 driver series would you recommend for someone who gets a good penetrating flight from PX 5.5 in his irons and an Axivcore Tour Red 79 in his 3 wood? Ta muchly! ;)

You really should have an ask aunty Ethan column in the mag! :D
 
if its any help Beggsy I use rifle 6.5s in my irons and am a big fan of the Aldila shafts in my fairway woods, have used either the VS proto or the NV85 both in X flex. I tend to like my shafts on the heavier side, if you prefer them lighter then the NV comes in a 65g or a 75g too.
 
I've been pulling/hooking my fairway woods, particularly off the deck and my pro reckons its due to the shaft being too soft. Will be looking to get fitted for a new 3 wood and possibly driver before the main competition season starts.

Jumping and bandwagons spring to mind :)
 
I had the same problem (we are so alike)

I've gone short, stiff and heavy and it turned out to be a dream move! I cannot but middle the club now! The driver today was perfect bar a slight fade and the fairway wood was a lovely high draw 9/10
 
Top