Driver shafts (Ventus)
- Thread starter Bamberdele2.0
- Start date
Imurg
The Grinder Of Pars (Semi Crocked)
Hard to be sure but it doesn't sound too much off the ballpark
adasko
Assistant Pro
220 for used sounds about right, I've paid for new 300 each.
If you buying new driver 220 extra on top does hurt but if you just getting shaft its not too bad. Regular shafts ( not upgraded ) are around 100 pounds.
I went for a shaft fitting with my existing driver Ping g430, I liked the head but shaft was too low spining. Tried a lot of different shafts some of them was 700 pounds+
Ventus blue velocore felt the best, sold my old shaft for 100 on marketplace so only 200 for brand new.
2 iron was a different story, with upgraded shaft paid 500.
clubchamp98
Journeyman Pro
I have a G430 with a ventus red TR great shaft much better than the stock Alta.
I hit the ball very low (minus 2 AOA which deloft the face.)
I’ve tried to change over the years but can’t.
Ventus does hit it higher.
Not really much longer but is very straight.
I hit the ball very low (minus 2 AOA which deloft the face.)
I’ve tried to change over the years but can’t.
Ventus does hit it higher.
Not really much longer but is very straight.
jim8flog
Journeyman Pro
Something which might interest you
Not sure if it is a velocore or not
I have seen a few on ebay
Google Search
www.google.com
Not sure if it is a velocore or not
I have seen a few on ebay
Last edited:
Yup. Also seen a Ventus red for around the same price which was one of the reasons I started the thread.
Hard to know what is best without trying them tho but I’ve got my heart set on the blue. Just debating whether or not the Velocore+ is worth it.
Will test it out next week
Springveldt
Well-known member
The Velocore+ shafts only got released a few months ago, that looks like a really good price for one.I’ve just been offered a Ventus Velocore+ 5s by a club repair specialist who I’ve used in the past.
I’ve rang around today and it doesn’t look like I’ll be getting the new stock Ventus released by TaylorMade for a few weeks.
Is this Velocore+ going to improve my game more than the stock Ventus shafts? And is there much difference to the velocore and velocore+
He’s after £220
Seems like a lot of money for a 15HC to part way with
I Tested All Four Fujikura Ventus Driver Shafts And It Threw Up Some Big Surprises
After one of the most dominant shaft franchises of all time with the original Ventus, has Fujikura managed to refine a masterpiece?
www.golfmonthly.com
Last edited:
PaulMdj
Well-known member
Bargain Golf Equipment have put sn offer on Facebook, trade in our QI10 for a QI35 and pay just £250.00
Upgrade Alert!
Fancy upgrading your Qi10 to the all-new Qi35? Now’s your chance!
Place your order today and get ready for release on the 30th!
Upgrade for just £250!
If you have an older model ie: Stealth 2 in the same deal it would cost you £300 to upgrade
Important Details:
Your current Qi10 driver must be in good condition with the headcover included.
Fitting price is not covered in this promotion.
Don’t miss this opportunity to take your game to the next level!
Get in touch now for more details and to secure your upgrade!
#UpgradeNow #Qi35 #NextLevel
Upgrade Alert! Fancy upgrading your Qi10 to the all-new Qi35? Now’s your chance!
Place your order today and get ready for release on the 30th! Upgrade for just £250! If you have an older model ie: Stealth 2 in the same deal it would cost you £300 to upgrade
Important Details:
Your current Qi10 driver must be in good condition with the headcover included.
Fitting price is not covered in this promotion.
Don’t miss this opportunity to take your game to the next level!
Get in touch now for more details and to secure your upgrade!#UpgradeNow #Qi35 #NextLevel
jim8flog
Journeyman Pro
The Velocore+ shafts only got released a few months ago, that looks like a really good price for one.
I Tested All Four Fujikura Ventus Driver Shafts And It Threw Up Some Big Surprises
After one of the most dominant shaft franchises of all time with the original Ventus, has Fujikura managed to refine a masterpiece?
I thought the Velocore shafts have been around for some time it is the TR shafts that are relatively new. Looking at the Fujikura video on their website, as I understand it, what they are saying is that coupled with the original Ventus they are now offering 6 levels of stiffness with the TR series being slightly stiffer per rating than the standard Ventus.
Personally I am still playing the Pro but have decided to give the Ventus a try. I did buy an Atmos 7R blue last year but never got round to building it and giving it a whirl.
