These 910 Drivers.......

M

Macster

Journeyman Pro
Joined
Aug 21, 2008
Messages
2,427
Location
East Yorks
Visit site
....really are the Dogz Nadgers !! :D

Still early season for me......only played 3 full rounds so far, and a few 12 hole outings,.......but so far, my 910 D3 is proving to be the best bit of kit I have put in my bag for a long time

Sent 3 out today which were 258/ 262, & 266yds, measured by GPS watch.
Even better - they were all in the fairway ! :eek:

Makes life so much easier when you get 'em away like that :cool:
Happy days.
 
Good to hear I am still waiting for mine(either today or monday the joys of living on a rock in the middle of the irish sea)

You have now turned my excitement level up to 11
 
Yeah they really are an amazing club.

Hopefully going to try out the fairway woods soon and if they are anything like the drivers i'll end up with one.
 
I still seem to be faffing about with mine, I was fitted for it but I'm not as comfortable as I was with my trusty G10. It may just be that when you look back with fondness on a club you only remember the good shots. I hit it very well when on song but still playing to get the best setting for me, I've used 3 so far.
 
Loving mine. :)

I reached our 529yd par 5 6th in 2 today for the first time ever in competition. I did cut the dogleg out a bit by putting my drive a couple of yards into the right hand semi-rough, but then hit the 910 4 wood to about 7'.

Missed the putt though :(
Need a 910 putter
 
Region3: Which Fairway have you got ? and what degree ?

Durango: I have a 905R still, but could never get on with the shaft, - tis a lovely driver, and if you hit well, I think you're right, stick with it.
 
Yeah they really are an amazing club.

Hopefully going to try out the fairway woods soon and if they are anything like the drivers i'll end up with one.
Click to expand...
They are superb. I've had mine two weeks and love it. 910fd 15deg that will (so I'm told go to 13.5) which will be the strong 3 wood I've been looking for.
 
Yeah they really are an amazing club.

Hopefully going to try out the fairway woods soon and if they are anything like the drivers i'll end up with one.
Click to expand...
They are superb. I've had mine two weeks and love it. 910fd 15deg that will (so I'm told go to 13.5) which will be the strong 3 wood I've been looking for.
Click to expand...

They can go up 1.5 vig, but only down 0.75

There is a 13.5 available though.
 
Yeah they really are an amazing club.

Hopefully going to try out the fairway woods soon and if they are anything like the drivers i'll end up with one.
Click to expand...
They are superb. I've had mine two weeks and love it. 910fd 15deg that will (so I'm told go to 13.5) which will be the strong 3 wood I've been looking for.
Click to expand...

They can go up 1.5 vig, but only down 0.75

There is a 13.5 available though.
Click to expand...
Not.messed about with it yet. Didnt get.the tool with it. Driver is on the list to try this spring. I believe they supply the. Tool with the driver.
TBH it goes like stink at 15deg so in no rush to change it.
 
I had a quick go with a friends D3 9.5 with a stiff RIP shaft. It felt a little soft and I turned it over too much but I loved the look of the head. I think it would give my i15 a run for it's money with the right shaft and in 8.5 degrees. I'm tempted to go for a fitting.
 
Yeah they really are an amazing club.

Hopefully going to try out the fairway woods soon and if they are anything like the drivers i'll end up with one.
Click to expand...
They are superb. I've had mine two weeks and love it. 910fd 15deg that will (so I'm told go to 13.5) which will be the strong 3 wood I've been looking for.
Click to expand...

They can go up 1.5 vig, but only down 0.75

There is a 13.5 available though.
Click to expand...
Not.messed about with it yet. Didnt get.the tool with it. Driver is on the list to try this spring. I believe they supply the. Tool with the driver.
TBH it goes like stink at 15deg so in no rush to change it.
Click to expand...

Yeah, I was a bit peeved that I didn't get the tool with the fairway as well, but I have one from buying the driver.

Want me to bring it to Woodhall so you can have a fiddle? :o
 
I would really like to be properly fitted and try a few different shafts in the 910. I emailed titleist about demo days in my region but they are abit too far away over the next two months. I took a punt with my 905r which has the green aldila nv 65 stiff. Hit it very well and the control is excellent but maybe i'd be able to get abit more out of something tuned tomy swing. There is a local club that stocks titleist and have got a launch monitor but I doubt they've got an array of different shafts for me to try.
 
If they have the Fitting Cart then they'll have the stock shafts on it for you to try.
I've decided I'm going to go and hit the 910 fairway on Monday - not quite got enough time for a round so trying clubs is a good fallback.
 
Its all about keeping the ball in play. ive read some really bad reveiws about the driver ive been using for the last 4/5 years ,but I think its more about finding a shaft that suits, regardless of the club head.
 
It's interesting that the shafts in the Titleist drivers are 45" where other manufacturers are 46" plus.
Is this possibly why they're getting such good reviews.?
 
You must log in or register to reply here.

Similar threads

W
Celtic Manor 2010 course review May 2019
Replies
3
Views
6K
sunshine
S
Junior
Cobra Puma - "Smarter Ways 2018" ......what a day.
2 3
Replies
47
Views
9K
Junior
Junior
J
Winter Off Season Improvement Options
Replies
18
Views
3K
Dasit
D
F
MacDonalds Portal
Replies
10
Views
4K
Marshy77
M
Bazz
My Ping G series fitting day
2
Replies
39
Views
8K
Bazz
Bazz
Top