Rust on shafts

Davie81

Newbie
Joined
Nov 12, 2012
Messages
9
Visit site
I’ve had some rust on my 8i steel shaft which is currently away getting replaced but I’ve noticed something on my 9i and a couple of others and can’t tell if it’s a ding or rust pitting. What’s everyone’s thoughts? The pic with several dots is the 8i after the rust was cleaned off and the other pic is the 9i with the ding/pitting I’ve noticed. I’m hoping it’s just a ding as I don’t want to have to send the whole set back. My clubs are always dried off and cleaned down.
 

Attachments

  • 595F62EA-5339-43C4-8B70-E6BA4F7106B9.jpeg
    595F62EA-5339-43C4-8B70-E6BA4F7106B9.jpeg
    52.3 KB · Views: 6
  • 57782E92-84D5-4EAE-90B1-70CF81B067BB.jpeg
    57782E92-84D5-4EAE-90B1-70CF81B067BB.jpeg
    49 KB · Views: 6

harpo_72

Journeyman Pro
Joined
Feb 20, 2013
Messages
6,033
Visit site
Okay simple thing to do is rub them with wet aluminium foil. This will react and the chrome will reappear where there was rust.
 

Davie81

Newbie
Joined
Nov 12, 2012
Messages
9
Visit site
First pic, looks like a tiny ding. The other is surface pitting which the foil will address
Thanks, the 2nd pic is getting replaced but I was worrying if the first pic was pitting or a ding. If it’s a ding that’s a relief as there’s the same mark on a few other clubs. What can cause dings to the shafts?
 

harpo_72

Journeyman Pro
Joined
Feb 20, 2013
Messages
6,033
Visit site
Thanks, the 2nd pic is getting replaced but I was worrying if the first pic was pitting or a ding. If it’s a ding that’s a relief as there’s the same mark on a few other clubs. What can cause dings to the shafts?
Any small impacts, could happen before or after installation
 
Top