JM96
Member
I’ve got a Ping G430, would I need a Ping specific adjustment tool or are all brands compatible and with the same torque specs?
Driver head adjustment wrench
- Thread starter JM96
- Start date
anotherdouble
Journeyman Pro
I have found all to be compatible but I think it’s been mentioned on here that one brand is different. It might be PXG but I am guessing from poor memory
JM96
Member
so you think all torque specs are the same?
anotherdouble
Journeyman Pro
I have had titleist drivers for years and I have used all of the main brands wrenches
Lucifer MorningStar
Well-known member
Most if not all brands now use Torx T25 fittings and wrenches so unless the club you’re planning to use it on is over 10+ years old you should be absolutely fine especially with Ping.
anotherdouble
Journeyman Pro
Thanks for that. Every day a school day
Pxg ones are okay on other brands. I have one and adjusted my sons mizuno hybrid earlier this year.
wjemather
Well-known member
Pretty much all clubs made in the last 10 years use the same specs (T25, 40 in-lb) so wrenches are compatible.
Some older clubs are rated for lower torque (30 in-lb).
Some older clubs are rated for lower torque (30 in-lb).
slicer79
Challenge Tour Pro
Srixon used to use a different one but anything modern is the same now
jim8flog
Journeyman Pro
The torque ratings can be different
e.g The silver TM one has a lower torque rating than the white one.
I use the white TM one on both my Ping 3W and my Titleist Rescue without any problems
e.g The silver TM one has a lower torque rating than the white one.
I use the white TM one on both my Ping 3W and my Titleist Rescue without any problems
kp17
Newbie
All the big brands now use the same bit, wee sort of star shape. Titleist one definitely fits ping and vice versa. Taylor made, callaway etc are all the same.
Klimski
Well-known member
Honma uses some kind of sleeve thing with their wrenches. But I have found out that you don't really need it, and any wrench fits. So I think they are universal.
Smoj
Active member
i use a honma wrench, worked on all the big OEM woods - and odyssey putter weights
Taz
Journeyman Pro
Anyone use something other than a branded tool. my PXG one just spins now and for what they are the branded ones are somewhat overpriced 
Orikoru
Tour Winner
I have a TaylorMade adjustment wrench I've had since 2017 and it still works on my current clubs. 
Lucifer MorningStar
Well-known member
PXG uses an industry Standard Torx 25 wrench. If you buy specific to brand you’re looking at £25+, but you can easily pick a normal one of Amazon for around £8-£10 which for all industry standard Torx 25 driver adapters.Anyone use something other than a branded tool. my PXG one just spins now and for what they are the branded ones are somewhat overpriced
wjemather
Well-known member
PXG sell their own branded wrench for £10. TaylorMade's is £15. Most others are similarly well under £25.
Lucifer MorningStar
Well-known member
Last time I looked PXG were quoting £25. Every days a school day
There are also loads on ebay, some coming from golf shops.
Orikoru
Tour Winner
I got mine for free when I bought a driver from a second hand outlet, asked "oh does it come with a wrench?" and they said 'think we've got one out the back, I'll get it for you'.
Really it's a bit cheeky that new drivers don't come with them. Like buying a phone and not getting a charger with it.
