Scott Gourlay - SGGT - My custom fit.

  • Thread starter Thread starter thecraw
  • Start date Start date
Tommo21 said:
I see the cleaners been in. Done an excellent job I might say.
Click to expand...


Yip I asked Chris to do his bit. I told Scott that he has huge potential and lots of interest on here. I also sent him a link to the thread. I thought it best that the spam was removed.

I know for a fact that two forum members are going through next Sunday and Fabian has also made an enquiry.
 
thecraw said:
Yip I asked Chris to do his bit. I told Scott that he has huge potential and lots of interest on here. I also sent him a link to the thread. I thought it best that the spam was removed.

I know for a fact that two forum members are going through next Sunday and Fabian has also made an enquiry.
Click to expand...

Have spoke via email with Scott and is a very helpful guy,thinking of arranging to go and see about new iron shafts, as i said mate good luck with the new wand
 
To thecraw
Out of interest, what length shaft did u end up with in your new driver.....??
And was driver shaft length discussed.....??.......or even did u hit different length driver shafts.....??
Just curious, as Ive only ever been fit local for the usual big name stuff, and although various shafts have been tried, the length of shaft has never been spoke of, or tried, and obviously can be relevant.....
Just wondering if an independant fitter talks about, or works on this with u aswell ??
As i know of people Ive spoke to, ( one ex tour player, local to me ) and others, that generate greater clubhead speed with a shorter shaft ( as opposed to T-Made lengthening theirs ) and thus play, 44", 44.5" driver shafts
Did Scott have a take on this..............??

Incidentally - although Ive never seen a KZG driver in 'the flesh' ...... I have seen some Forged KZG Irons, and they were great looking clubs.
Some people are ignorant to anything that isnt T-Made, Callaway, Titleist, Mizuno, Ping......etc
There's plenty of other quality gear out there

Good luck with the new Driver anyway
 
This chap sounds like the guy I dealt with at Club Crafters in Epsom, he will build/make any club you want but a lot of people who go there with a blank piece of paper end up with KZG type components. He told em that they are the same quality and technology but they dont spend £M's on tour players/advertising etc.

I think you have got a good set up and its great when you have a club spec'd for you in that you trust it very quickly and if you are hitting it like a mug then ylou are the mug, not the club.

Good luck with it......
 
moogie said:
To thecraw
Out of interest, what length shaft did u end up with in your new driver.....??
And was driver shaft length discussed.....??.......or even did u hit different length driver shafts.....??
Just curious, as Ive only ever been fit local for the usual big name stuff, and although various shafts have been tried, the length of shaft has never been spoke of, or tried, and obviously can be relevant.....
Just wondering if an independant fitter talks about, or works on this with u aswell ??
As i know of people Ive spoke to, ( one ex tour player, local to me ) and others, that generate greater clubhead speed with a shorter shaft ( as opposed to T-Made lengthening theirs ) and thus play, 44", 44.5" driver shafts
Did Scott have a take on this..............??

Incidentally - although Ive never seen a KZG driver in 'the flesh' ...... I have seen some Forged KZG Irons, and they were great looking clubs.
Some people are ignorant to anything that isnt T-Made, Callaway, Titleist, Mizuno, Ping......etc
There's plenty of other quality gear out there

Good luck with the new Driver anyway
Click to expand...



I believe I was a 45 inch shaft. I was also asking Scott about length and he says he wouldn't put anyone into a shaft longer than 45".

I tried a good few shafts however I believe they were all similar length.

I will certainly be chopping an inch maybe another half inch off my 3 wood now.
 
thecraw said:
I believe I was a 45 inch shaft. I was also asking Scott about length and he says he wouldn't put anyone into a shaft longer than 45".

I tried a good few shafts however I believe they were all similar length.

I will certainly be chopping an inch maybe another half inch off my 3 wood now.
Click to expand...


Thats good to hear............
I always have my Drivers adjusted to 45" , I dont feel comfortable with longer, and its more Controllable
Ive just bought the i20 and its length is only 45.25" , short by modern standards, so will see how I get on, may not notice the extra 1/4".......??

Did u hit your 3 wood at the session too.......??
Did Scott advise this shortening of the 3 wood too.....??
Or just something u feel u would like to do........??
 
Smiffy said:
Is Scott related in any way to the old Secretary from Scotscraig GC? His name was Gourlay too.
Click to expand...

Aye, all us Scots ken each other and we're all related!

Do you know Peter Smith from Sunderland? He's got the same surname as you???
:temper:
 
Smiffy said:
Is Scott related in any way to the old Secretary from Scotscraig GC? His name was Gourlay too.
Click to expand...

Not sure Smiffy to be honest,but we could do with a new secretary as the one thats there is the most obnoxious and ignorant midget i've ever met ,he's only interested in himself
 
Great write up thecraw, i cant believe how good he is. His knowledge is awesome, and its great that a few of the big companies are coming on board with him. After i get my new irons, i will be changing my shafts on all my woods, to this new prototype shaft. I tried out a Taylormade hybrid club, with this new prototype shaft, and i was hitting 200+ straight done the middle every time, with a great ball flight.
 
Just catching upon some threads and found this really interesting.

Checked out the link and that driver looks fab, lovely clean lines. Hope it delivers for you on the course.

I have heard of KZG and know they have a great reputation for quality. Their forged irons look absolutely beautiful and for anyone like me who is a fan of clean looking clubs that aren't smothered in plastic and logos they would be very tempting. Not sure how readily available they are as I undersand KZG only supply independent fitters.

Scott sounds great.You are lucky people to have access to such a skilled guy.
 
I just ordered my Custom Fit KZG Wedges today, and they will be ready tomorrow in time to play Glencorse. I have chosen to go with the Scandium Tour Rifle Prototype Shafts, the same as my TM MC irons. And Iomic Sticky Grips.
 
You must log in or register to reply here.

Similar threads

S
Celtic Manor Membership
Replies
10
Views
3K
IanM
IanM
Klimski
Honma TW XP-1 driver
Replies
7
Views
848
Orikoru
Orikoru
road2ruin
Scott Readman Concepts
Replies
18
Views
903
road2ruin
road2ruin
S
Change to graphite shaft for irons 8- PW. Advice please
Replies
17
Views
720
Lucifer MorningStar
Lucifer MorningStar
N
Camera advice
Replies
14
Views
367
spongebob59
spongebob59
Top