Wanted Iron Set with Regular Shaft/Lie/Length

[Dave B]

I'm looking for a set of irons for my brother. He plays a regular standard regular shaft/club length/lie and is looking for a decent iron set to get him down to mid figures.

Looking for Wilson Ci9/11 or similar, but will consider Ping G15/20 or Titleist AP1 710 at the right price. Any other quality irons will also be considered.

Clubs must be VGC

Budget preferably as low as possible, up to £150 but will stretch it for the right clubs and offer, (Pings/AP1's).

Graphite or steel shafts.

 

[palindromicbob]

Would probably consider shifting my Callaway Razr X on for £150. They are off the shelf so about as standard as you can get also happened to be what my fitting recommended!

4-PW steel shafts.

http://www.golfbidder.co.uk/models/4039/Callaway_Iron_Set_RAZR_X.html

 

[ArnoldArmChewer]

Dave B

I have a set of Cally X22 tour irons with rifle shafts (5.0), standard otherwise. In good nick if of interest.

 

[Dave B]

Arnold he may have issues with the X22 tours as he was a bit inconsistent with my i15's when he tried them so he may need to stick with GI irons rather than better players.

Bob what condition are the Razr's in can you give marks out of 10? Also does the £150 cover delivery? He has been offered a set of AP1's but is waiting to see what other clubs are available.

 

[palindromicbob]

Arnold he may have issues with the X22 tours as he was a bit inconsistent with my i15's when he tried them so he may need to stick with GI irons rather than better players.

Bob what condition are the Razr's in can you give marks out of 10? Also does the £150 cover delivery? He has been offered a set of AP1's but is waiting to see what other clubs are available.

Good condition, usual marks and scratches you would expect having been gamed.
Head 7.5/10 (Sweet spots untouched )
Shafts 9/10
Grips 8/10

Worst head for scratches is probably the PW but then it does get used in some pretty wicked lies. Nothing major though.

Just recently redid all the paint fills. This is easily restored back to black or any colour you might want.

Should be able to do them £150 posted. £160 max. Would also throw in an MD Icon driving iron like this one with a reg steel shaft. I just don't get on with it but he might and better to have someone trying to give it a wack than gather dust in my junk room. New cost is so low resale isn't worth it.

http://www.ebay.co.uk/itm/like/1606...f11=ICEP3.0.0&ff12=67&ff13=80&ff14=108&ff19=0

Here is some photos. They need a little clean up as the grooves have a little dirt in them still from my last outing. I cleaned them with a towel on the course but haven't got round to giving them my usual attention.

PW face. Little bit of infill out on bottom line. (I really need to clean out the grooves)
http://flic.kr/p/ktttE6

Stickers on the shaft. This has come off the 8i.
http://flic.kr/p/ktvHhb

Grips have plenty of life. Have just pulled these from the bag and there is a little dirt dust.
http://flic.kr/p/ktu4FF

Purple paint fill. Can be easily changed or taken back to black.

http://flic.kr/p/ktvL1Y

 

[Dave B]

Just had a phone call he's managed to get hold of a new set of Cleveland CG 16's for £149 which is a bargain