steveh
Club Champion
I was one of the lucky three chosen to test the Burner OS irons in December so here are my initial thoughts. Due to a mix up with shafts (I received stiff rather than regular flex to start with) I've just got the right clubs this week so here goes. I haven't hit the clubs yet so this first post is just based on set make up, spec and looks but I'm hoping to get out on Sunday to give them a hit weather permitting so I'll report back then. My current irons are Taylormade R7 Draw so that will be my basis for comparison along the way.
The Burner OS set is 5-SW and my current set is 4-PW and I have a 52* Vokey and a 56* Taylormade RAC wedge. I'm slightly worried by the lack of a 4i in the new set as this is a club I use quite a lot but I'll see how I get on. I have a Taylormade Mid 19* hybrid so may need to invest in another hybrid depending how I hit the new 5i.
I've read a lot recently about how Taylormade have added distance by strengthening lofts and lengthening shafts so I compared the specs for the Burner OS against my current R7. The lofts were identical apart from the PW which has an extra 1* of loft on the new set. The shafts seem about the same,e lengths on the same clubs too so the sets are pretty similar in that regard.
I think the Burners look great though with a gun metal finish and a chromed sole. The soles are quite thick and the clubs look really confidence inspiring at address. For equivalent clubs they just look bigger and more lofted and look like they'd be easier to hit. The pictures are of my R7s on the left against the Burners on the right for 5i, 7i and SW. I've also put a couple of pics comparing the looks of the two clubs for the 7i.
So that's about all I can say without hitting them. Can't wait to get out and have a bash at weekend. I've got a couple of worries around the rest of my set up, especially the lack of a 4i but I'll just have to see how I get on. I'll continue to update this thread to let you know how I get on.






The Burner OS set is 5-SW and my current set is 4-PW and I have a 52* Vokey and a 56* Taylormade RAC wedge. I'm slightly worried by the lack of a 4i in the new set as this is a club I use quite a lot but I'll see how I get on. I have a Taylormade Mid 19* hybrid so may need to invest in another hybrid depending how I hit the new 5i.
I've read a lot recently about how Taylormade have added distance by strengthening lofts and lengthening shafts so I compared the specs for the Burner OS against my current R7. The lofts were identical apart from the PW which has an extra 1* of loft on the new set. The shafts seem about the same,e lengths on the same clubs too so the sets are pretty similar in that regard.
I think the Burners look great though with a gun metal finish and a chromed sole. The soles are quite thick and the clubs look really confidence inspiring at address. For equivalent clubs they just look bigger and more lofted and look like they'd be easier to hit. The pictures are of my R7s on the left against the Burners on the right for 5i, 7i and SW. I've also put a couple of pics comparing the looks of the two clubs for the 7i.
So that's about all I can say without hitting them. Can't wait to get out and have a bash at weekend. I've got a couple of worries around the rest of my set up, especially the lack of a 4i but I'll just have to see how I get on. I'll continue to update this thread to let you know how I get on.





