FS: Titleist 910F Fairway Wood

[Region3]

I've just replaced this club and I'm not one for hanging on to clubs that aren't in the bag (except putters ) so this is up for sale.

It's a 17deg (4 wood) with stiff flex Project X 8C4 82g shaft.

Not in pristine condition, but not bad for 2 years old. Only ever been owned/used by me, and it gets brushed clean after every shot and headcover back on straight away. I can only surmise that the scratches at the top of the face/front of the crown are the result of my bad shots!

It will also come with another shaft, the result of an expensive experiment. A Diamana Kai'li 75g also in stiff.
Both shafts are in very good condition with Titleist 360 grips also in good condition.
Headcover also in very good nick.

Unfortunately it won't come with the wrench because I only have one and need to keep it for my driver. If the buyer doesn't have one I will set it to whichever setting with whichever shaft before I post it.

I'm looking for £70 posted.

Any questions please ask

 

[Region3]

Kai'li shaft potentially sold on it's own, so now looking for £50 posted for the club with a Project-X shaft.

 

[JT77]

R3 what's the max loft it can go thanks?

 

[Region3]

It moves in 0.75° steps, and can go 2 up or 1 down, so the simple answer is 18.5°

Here's the chart....

 

[Region3]

Kai'li shaft now gone, so just the 4 wood to go.

 

[Hendy]

Would you be interested in dealing with this

 

[Region3]

Would you be interested in dealing with this

Sorry Hendy, I already have a GPS and a laser.

 

[MarkA]

Would you take £40 for it - Its not really the shaft I want its a pity you sold the Kai'li

 

[Region3]

Would you take £40 for it - Its not really the shaft I want its a pity you sold the Kai'li

Only if you can get it picked up. By the time I've taken the courier cost off that it's so cheap I'd rather keep it as a spare or swop it with my pro for a box of balls. Sorry.

 

[MarkA]

Let me have a think, I'll see how much a suitable shaft will be.

 

[Region3]

Let me have a think, I'll see how much a suitable shaft will be.

No problem. I bought mine off eBay, cost me about £40 I think, but should be able to get one for less now.
I certainly think the PX should fetch more than the Kai'li would cost.

I assume you've tried the PX shaft? I didn't think there was much between them when I tried both, although the PX is definitely a little lower launching, and slightly stiffer.

 

[MarkA]

ive got a rip 60 in my D2 , but i have got a spare kaili driver shaft im just wondering about getting it shortened !

 

[Region3]

ive got a rip 60 in my D2 , but i have got a spare kaili driver shaft im just wondering about getting it shortened !

As much as I want to sell my club, I'm not sure that is a good idea. As well as being shorter, the fairway shaft is heavier than the driver shaft so it could play havoc with the swing weight and it's possible the flex will be altered as well depending on how much has to be taken off.

 

[bigslice]

Let me have a think, I'll see how much a suitable shaft will be.

ive got a brand new kali one out of a titleist 17 wood that i was going to sell, if that helps

 

[MarkA]

I thought you'd sold the Kai'li !
Go on then £50 with the Kaili shaft - Paypal ok?

 

[Region3]

I thought you'd sold the Kai'li !
Go on then £50 with the Kaili shaft - Paypal ok?

If that was to me, I have sold the Kai'li.

It's bigslice that has a Kai'li fairway wood shaft, not me. Sorry for the confusion.

 

[MarkA]

Oops misread that!

 

[MarkA]

Big Slice, how much for he Kaili?

 

[bigslice]

£45 delivered , its brand new i never used it as i put another shaft in the 17 wood

 

[MarkA]

I'll have a think - Im not sure i can be bothered selling the Project x shaft!