Titleist 907 D2 Regular or Stiff ??

[piratepete]

I tried the 907 d2 with diamana reg and stiff shafts a while back, and though it was great I never got around to buying, I currently use a G10 10.5' stiff, can somebody advise which shaft I should look at, I've heard that as the shaft is a bore through it has a stiffer characteristic than hosel glued shafts. I recently tried the 909 but didn't like it as much, so am looking out for a good 907 d2. That is of course if I can get to hitting the bloody big stick right again. I use titleist 972 irons which are great and want to compliment them with the titleist woods.

 

[USER1999]

I just couldn't find a shaft that works with the 907D2.

Can't see what there is not to like about the 909 though. Much better impact noise to start with.

 

[Stevenc]

Never tried the 907 but have the 909 D2.

Is this what your looking for?

HERE

 

[Ethan]

The 907 is regarded as quite a high spin driver head compared to the 909, so better players didn't like it. All other things being equal, the bore through shaft is stiffer than a blind bore.

Depends which shaft you have in the Ping, but if it is the TFC shaft, that is not very stiff. The Titleist Diamana is also not a real Diamana, and plays softer than aftermarket Blueboard shafts. so it depends a bit on your swing speed and how you hit it. I would say the Titleist R is not too far off the Ping S, and a Titleist S would be stiffer.

Another option is the 905 which is probably a better driver than either, and the 909 not bad either. A 905 with a R V2 would be a nice weapon.

 

[piratepete]

Thanks Ethan, hadn't considered the 905, that's given me even more to think about. Suppose I need to get back to hitting the big stick right before investigating further.

 

[Billy]

You can get all the advice in the world but you won't know which one is for you until you've tried them.