ping adjustment to colour code

Local Pro who deals in Ping or Ping themselves
 
Could the pro do it his self with a loft lie machine? could he adjust lofts on these irons by 1 degree? they are not forged so can it be done?

Some pros could all depends on if he has the equipment
 
It's only 2 colour codes apart so shouldn't be an issue.

Contact Ping at Gainsborough and tell them you would like the dot colors adjusting.

You then send them to Ping, they adjust the dot colour, change the clubs official crib sheet and send the clubs back to you. My old boy did this, except he drove to Gainsborough and waited for them to be adjusted. He even got some tokens to use on the Karsten course driving range to try out the adjustments courtesy of Ping.

You just pay the postage, they do the adjustments for free.

One word of warning. Just make sure they haven't been previously adjusted by someone other than Ping. Other wise they won't touch them.
 
I was looking at this last week......... The ping website says they must be returned through an authorised dealer, not direct (although the tel number and address of the repair department is on that page of the website too...)
There's also a chart detailing how many dots they can be adjusted, depending on model it ranges from 0 to 5 !!!

Maximum Lie Angle Adjustability

[TABLE="class: zebra-stripe"]
[TR]
[TH]Model[/TH]
[TH]Adjustability[/TH]
[/TR]
[TR="class: even, bgcolor: #BEBEBE"]
[TD="align: center"]i20 irons[/TD]
[TD="align: center"]5 color codes[/TD]
[/TR]
[TR]
[TD="align: center"]G20 irons[/TD]
[TD="align: center"]5 color codes[/TD]
[/TR]
[TR="class: even, bgcolor: #BEBEBE"]
[TD="align: center"]S56 irons[/TD]
[TD="align: center"]5 color codes[/TD]
[/TR]
[TR]
[TD="align: center"]Anser wedges[/TD]
[TD="align: center"]5 color codes[/TD]
[/TR]
[TR="class: even, bgcolor: #BEBEBE"]
[TD="align: center"]Anser irons[/TD]
[TD="align: center"]5 color codes[/TD]
[/TR]
[TR]
[TD="align: center"]Tour-S wedges[/TD]
[TD="align: center"]5 color codes[/TD]
[/TR]
[TR="class: even, bgcolor: #BEBEBE"]
[TD="align: center"]K15 irons[/TD]
[TD="align: center"]5 color codes[/TD]
[/TR]
[TR]
[TD="align: center"]Faith irons[/TD]
[TD="align: center"]5 color codes[/TD]
[/TR]
[TR="class: even, bgcolor: #BEBEBE"]
[TD="align: center"]i15 irons[/TD]
[TD="align: center"]5 color codes[/TD]
[/TR]
[TR]
[TD="align: center"]G15 irons[/TD]
[TD="align: center"]5 color codes[/TD]
[/TR]
[TR="class: even, bgcolor: #BEBEBE"]
[TD="align: center"]Rapture V2 irons[/TD]
[TD="align: center"]5 color codes[/TD]
[/TR]
[TR]
[TD="align: center"]S57 irons[/TD]
[TD="align: center"]4 color codes [4°][/TD]
[/TR]
[TR="class: even, bgcolor: #BEBEBE"]
[TD="align: center"]i10 irons[/TD]
[TD="align: center"]5 color codes[/TD]
[/TR]
[TR]
[TD="align: center"]G10 irons[/TD]
[TD="align: center"]5 color codes[/TD]
[/TR]
[TR="class: even, bgcolor: #BEBEBE"]
[TD="align: center"]Rhapsody irons[/TD]
[TD="align: center"]5 color codes[/TD]
[/TR]
[TR]
[TD="align: center"]S58 irons[/TD]
[TD="align: center"]4 color codes [4°][/TD]
[/TR]
[TR="class: even, bgcolor: #BEBEBE"]
[TD="align: center"]Tour-W (Brushed Silver Chrome finish)[/TD]
[TD="align: center"]4 color codes[/TD]
[/TR]
[TR]
[TD="align: center"]Tour-W (Black Nickel finish)[/TD]
[TD="align: center"]3 color codes[/TD]
[/TR]
[TR="class: even, bgcolor: #BEBEBE"]
[TD="align: center"]i5 irons[/TD]
[TD="align: center"]5 color codes[/TD]
[/TR]
[TR]
[TD="align: center"]G5 irons[/TD]
[TD="align: center"]5 color codes[/TD]
[/TR]
[TR="class: even, bgcolor: #BEBEBE"]
[TD="align: center"]Rapture V2 irons[/TD]
[TD="align: center"]5 color codes[/TD]
[/TR]
[TR]
[TD="align: center"]Rapture irons[/TD]
[TD="align: center"]5 color codes[/TD]
[/TR]
[TR="class: even, bgcolor: #BEBEBE"]
[TD="align: center"]iWedge[/TD]
[TD="align: center"]2 color codes [2°][/TD]
[/TR]
[TR]
[TD="align: center"]Tour Wedge[/TD]
[TD="align: center"]3 color codes[/TD]
[/TR]
[TR="class: even, bgcolor: #BEBEBE"]
[TD="align: center"]Tour Wedge (Black Nickel finishes)[/TD]
[TD="align: center"]3 color codes[/TD]
[/TR]
[TR]
[TD="align: center"]PING wedges[/TD]
[TD="align: center"]2 color codes [2°][/TD]
[/TR]
[TR="class: even, bgcolor: #BEBEBE"]
[TD="align: center"]S59/S59 Tour irons[/TD]
[TD="align: center"]4 color codes [4°][/TD]
[/TR]
[TR]
[TD="align: center"]G2 irons[/TD]
[TD="align: center"]5 color codes[/TD]
[/TR]
[TR="class: even, bgcolor: #BEBEBE"]
[TD="align: center"]i3+/i3+ Blade irons[/TD]
[TD="align: center"]2 color codes [2°][/TD]
[/TR]
[TR]
[TD="align: center"]i3 irons (Blade/O-Size)[/TD]
[TD="align: center"]2 color codes [2°][/TD]
[/TR]
[TR="class: even, bgcolor: #BEBEBE"]
[TD="align: center"]ISI/ISI-N (Copper/Nickel)[/TD]
[TD="align: center"]none[/TD]
[/TR]
[TR]
[TD="align: center"]ISI-S/ISI-K (Steel)[/TD]
[TD="align: center"]2 color codes [2°][/TD]
[/TR]
[TR="class: even, bgcolor: #BEBEBE"]
[TD="align: center"]ZING2 (Copper)[/TD]
[TD="align: center"]none[/TD]
[/TR]
[TR]
[TD="align: center"]ZING2 (Steel)[/TD]
[TD="align: center"]2 color codes [2°][/TD]
[/TR]
[TR="class: even, bgcolor: #BEBEBE"]
[TD="align: center"]ZING (Steel or Copper)[/TD]
[TD="align: center"]none[/TD]
[/TR]
[TR]
[TD="align: center"]EYE2/EYE2+ (<10 yrs old)[/TD]
[TD="align: center"]4 color codes [4°][/TD]
[/TR]
[TR="class: even, bgcolor: #BEBEBE"]
[TD="align: center"]EYE2/EYE2+ (10-15 yrs old)[/TD]
[TD="align: center"]2 color codes [2°][/TD]
[/TR]
[TR]
[TD="align: center"]EYE2 (Copper)[/TD]
[TD="align: center"]none[/TD]
[/TR]
[TR="class: even, bgcolor: #BEBEBE"]
[TD="align: center"]EYE[/TD]
[TD="align: center"]none[/TD]
[/TR]
[TR]
[TD="align: center"]KARSTEN I-IV[/TD]
[TD="align: center"]none[/TD]
[/TR]
[TR="class: even, bgcolor: #BEBEBE"]
[TD="align: center"]Moxie irons[/TD]
[TD="align: center"]none[/TD]
[/TR]
[/TABLE]
 
Last edited:
I was looking at this last week......... The ping website says they must be returned through an authorised dealer, not direct (although the tel number and address of the repair department is on that page of the website too...)
There's also a chart detailing how many dots they can be adjusted, depending on model it ranges from 0 to 5 !!!

Which is why I said contact them directly in advance :lol:

My dad wouldn't drive from sunny Stoke to Gainsborough on the off chance, believe me.
 
Top