Why is every diy job a pain?

chrisd

Major Champion
Joined
Sep 22, 2009
Messages
25,082
Location
Kent
Visit site
So, we found a bedroom radiator had started to leak when the heating was put on for a short while last week. It seemed easier to replace the rad than find and sort the leak. I bought a new one and the bits and bobs, drained down the rad and, lo and behold, the outlet in the new rad is 15mm but the valve has (I guess) a 22mm inlet - so I can't just connect up the new rad without draining the system and changing the 2 valves as well

Why does life have to be so complicated?
 
So, we found a bedroom radiator had started to leak when the heating was put on for a short while last week. It seemed easier to replace the rad than find and sort the leak. I bought a new one and the bits and bobs, drained down the rad and, lo and behold, the outlet in the new rad is 15mm but the valve has (I guess) a 22mm inlet - so I can't just connect up the new rad without draining the system and changing the 2 valves as well

Why does life have to be so complicated?

Just take the fitting out of the old radiator and refit to the new rad.
 
I tackle most DIY jobs around the home and garden but there are three I will not touch. Electrics, Gas and Plumbing - always get the experts in. Much less hassle! :thup:
 
If it doesn't fit it can still be useful :D

ever_been_so_drunk_you_played_your_radiator_this_guy_has_big.jpg
 
I'm hopeless at, and hate, DIY but sometimes I have to do it :angry:.
It's at times like that the internet can be your friend.
We had a leak on the valve of the radiator in the hall. Tightening wouldn't fix it and it was down to either trying to replace it or get a plumber in. Either would involve draining the system.
I looked on the internet and found a video on you tube that showed how to fix the valve simply by using PTFE tape to replace the old packing. 5 minutes later and all fixed.
Now fixing a leaking radiator........... Not my idea of fun.
 
I'm hopeless at, and hate, DIY but sometimes I have to do it :angry:.
It's at times like that the internet can be your friend.
We had a leak on the valve of the radiator in the hall. Tightening wouldn't fix it and it was down to either trying to replace it or get a plumber in. Either would involve draining the system.
I looked on the internet and found a video on you tube that showed how to fix the valve simply by using PTFE tape to replace the old packing. 5 minutes later and all fixed.
Now fixing a leaking radiator........... Not my idea of fun.

I saw that one too and tried it but,sadly, it wasn't leaking from there.
 
Top