taylormade R9 fairway settings

[Grumps]

hi , ive picked up a R9 3 wood but dont have the settings card.
Does anyone still have the card/booklet issued with a new one as id like to adjust the shaft setting
but not sure if im adding loft or delofting it by changing things.

cheers in hope mike

 

[One Planer]

This is what came with my driver mind you. May help.

 

[Grumps]

thanks Gareth , do you have any idea if i set it to draw or fade will it change loft from present 15 deg or is that just the drivers

 

[One Planer]

thanks Gareth , do you have any idea if i set it to draw or fade will it change loft from present 15 deg or is that just the drivers

If you set it to fully (2*) closed to L, the loft, on the driver, goes up 1*

If you set it to fully (2*) open to R, the loft goes down 1*

N-R sets the loft down .5*

N-L sets the loft up .5*

The NU- L and R have the same effect as the above two.

NU is the same as square (Albeit a different lie).

These are for the driver, but being FCT, I would imagine it would be he same for the fairway woods.

 

[DaveM]

It is the same for the fairway wood. As they put the same card in. Guess what I got the lefthand fairway wood and that has the same card in to. So a righthanded driver card for a lefthanded wood. Good job I had the sence to transpose it!