Albanach
Head Pro
If you use an adjustable driver (in my case an SLDR) and get it re gripped will the position of the grip logo change clockwise or counter clockwise depending on the setting you use?
Adjustable driver re grip and shaft position
- Thread starter Albanach
- Start date
spongebob59
Journeyman Pro
Just get a 360grip fitted ie no logo.
pbrown7582
Money List Winner
Take not of your regular setting and get the grip put on with the logo how you prefer a sharpie on the shaft will be your friend.
garyinderry
Ryder Cup Winner
Yes it will move both ways depending.
Get it gripped at your preferred setting and that will be the new square.
Albanach
Head Pro
So if it was re gripped at the default setting prior to shipping and I've since changed the setting then the logo will either be stronger or weaker relative to the face...aghhhh...I need to stop using the logo as a reference when gripping the club!! Cheers
garyinderry
Ryder Cup Winner
If its a regular logo grip. as mentioned there are 360 grips which as you would expect are the same all the way around.
Just regrip it again if you need to.
Just regrip it again if you need to.
shortstuff
Assistant Pro
The grip and shaft will only move when you change the club-face position with a fixed-head driver. Surely?
D4RK1
Assistant Pro
Exactly what I was going to say. The shaft doesn't move when adjusting. Its the head of the club that moves around the shaft. Grip position will always be the same.
pbrown7582
Money List Winner
With the adjustable clubs there is an adaptor with a small spline and cam on it which you removed from club head rotate and re-torque to adjust loft of the club so the shaft/grip will be rotated around with each adjustment.
shortstuff
Assistant Pro
You've lost me. I used to have an adjustable R11 and the grip/shaft never moved when the head was adjusted.D4RK1
Assistant Pro
If people are adjusting their clubs and then not holding the grip in the centred position where the alignment marker is they're totally negating the agjustment they have just made.
Rooter
Money List Winner
Does the shaft rotate 270 degrees or 90 though?
The head remains roughly contstant, its the shaft that rotates in the head. so if you had a grip marked straight as stock, changed the loft 1/2 degree, the marker on the shaft would be off center.
Chose your adjustment, then go and get the club regripped.
The head remains roughly contstant, its the shaft that rotates in the head. so if you had a grip marked straight as stock, changed the loft 1/2 degree, the marker on the shaft would be off center.
Chose your adjustment, then go and get the club regripped.
Ethan
Money List Winner
Adjustable heads are an issue for people who like ribbed grips. As I do. Fortunately the Titleust adjustments have the same shaft alignment for the A1 (neutral) and B1 (slightly flatter/open, standard loft) settings.
